Aztec Temple Sentinel Tower & a Challenge Update

In this post I will share my latest MDF kit build for Feudal Patrol™ games in Mesoamerica (using my Civilizations Collide supplement). I was able to finish off another Aztec-inspired MDF kit. This one also came from from Things From the Basement via 4Ground via Badger Games (see it here). It is called Temple Sentinel Tower and is scaled for 28mm figures – and is just what it is described as being – a Temple Sentinel Tower which would be a nice piece of high ground for some missile troops.

This is part of “Mark’s Aztec Building Challenge Contest” (which you will read more about shortly in this blog post), as well as the April painting challenge from Ann’s Immaterium called Ann’s “Paint the Crap You Already Own” challenge.

The kit as received.

It was an enjoyable kit to build. This one had a few challenges for the build as I needed to make sure that I could paint the inside of the tower as well as dust it up with chinchilla dust as I have been doing. I want all these cityscape Temple structures to match in character – and in color and texture. Basically, as you will see, I broke the kit into two parts until final assembly.

The kit after wiping down with a moist microfiber cloth. The instructions were good.
First day of assembly and setting up with PVA, rubber bands, and clamps.
The lower tower section is on the left – and the top here has been left to work on separately with paint and chinchilla dust as I have previously described (see this page). Having steel washers around held as weights with PVA gluing.
The tower sections awaiting base coating after dusting up with the chinchilla dust and watered down PVA slurry.
The sections after the base coat was applied and the dry brushing of the textures. The red, black, and yellow colors were painted after the dry brushing.

The finished Temple Sentinel Tower next to my previous MDF builds. I put a few missile troops up in the tower as examples.
Different angle view.
An Aztec veteran with an atlatl peers out while a macuahuitl-armed comrade guards the ladder access. A sling-armed novice is at the top of the ladder.
A close up of a bowman (front) and another slinger (left) in the tower.

I think this came out well – what do you think?

For the other pieces in the building contest, I was also able to airbrush a decent base coat on my remaining resin structures, as well as to start on the ground cover on their styrene bases.

The remaining resin structures – I have a good start on them.

This now leaves me with two more MDF builds – the Temple High Throne and the Sacrificial Altar – in addition to the resin. These are going to take a back seat to finishing the resin pieces. This is because as I have more paint on order to properly finish them similarly to my previous MDF kits. I have found that I’m going though a good amount of paints and washes (chinchilla dust and MDF can be thirsty).

I have also tried to show you, dear readers, the progress in my challenge in a non-award-winning video on IGTV and Instagram (well it hasn’t won yet, so there’s hope…).

My main communications channel is THIS BLOG! But, I’m just trying to keep up with the young ‘uns like IRO. It’s a bit of an unscripted thing – so enjoy! Without any further ado – here is the video link live from my cellar (that I cannot put on WordPress without paying more $$).

So as for the contest – I have a shot below that shows the range of guesses:

The contest IS ON! Who will win?

We’ve got American, Aussie, and Brit entries (what’s up with the rest of the world?). Thanks to all for entering and best of luck – and follow my progress (and your chances) here! The average is May 19th, with Azazel the earliest on 4/24/2021 and Ann the latest on 6/30/2021. Hell, your guesses are as good as mine at this point for sure.

A couple of small side notes. I was quite surprised and happy to see that 4Ground featured my work on their Facebook page – here is that Facebook link – and much thanks to our pal Kuribo who let me know on the blog that he saw it. Also, this marks my 30th post on this subject – and while I’m happy about the progress I’ve made – the listing of all the posts is getting to be a bit much (never mind approving all the WordPress pingbacks that this generates).

So, I’ve added a new selection on my main menu (“Gaming & Hobby Areas of Interest”), and under that will be individual genre selections. I’ve started with a page with a list of and links to all of my Mesoamerican posts called “Aztec, Conquistador, and Mesoamerican Hobby Projects Posts” – and I will (over time) be augmenting it with other stuff, such as retro sci-fi, France 1940, Normandy, etc. But I won’t get to that for a while – I’ll be focusing here on the Aztec stuff! I’ll still add the paints and materials section as before, mostly for my own references.

Thanks for looking and I hope that you can check out the video link and no matter what – let me know what you think of the tower – or my accent – or my graying hair – or whatever.

For all of my previous posts on games, units, and other projects for my 16th Century Spanish Conquest supplement for Feudal Patrol™ – “Civilizations Collide” – please see this page.


  1. Elmer’s PVA Glue
  2. Poster tack
  3. Plastic Plates
  4. All Living Things Dry Dust Bath (chinchilla dust)
  5. Vallejo “Flow Improver”
  6. Vallejo “Airbrush Thinner”
  7. Vallejo Model Air “Sand (Ivory)”
  8. Vallejo Game Air “Desert Yellow”
  9. Vallejo Model Color “Dark Sand”
  10. Citadel “Ushabti Bone”
  11. DecoArt “Light Buttermilk”
  12. Vallejo Model Air “Wood”
  13. Vallejo Model Color “Red”
  14. Craftsmart “Black”
  15. Citadel “Yriel Yellow”
  16. Army Painter “Light Tone” (wash)
  17. Vallejo Game Air “Ivory”

Go to Source

Author: Mark Morin

Leave a Reply

Your email address will not be published. Required fields are marked *